Collet Chucks Categories
Collet Chucks
Showing 1–30 of 94 results
-
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
ADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks
- DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks.
SKU: ADJ BT-ER DIN 6499 ER Collet Chucks with Center Alignment and BT MAS-403 ADB Tapered Shanks -
Collet Chucks, DIN 69871 SK30/SK40/SK50, Tool Holders
ADJ DIN69871-ER Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form AD/B Taper Shanks
Collet Chucks, DIN 69871 SK30/SK40/SK50, Tool HoldersADJ DIN69871-ER Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form AD/B Taper Shanks
- Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form AD/B Taper Shanks.
SKU: ADJ DIN69871-ER Center Alignment DIN 6499 ER Collet Chucks with DIN 69871 Form AD/B Taper Shanks -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, Tool Holders
ADJ HSK A-ER DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Tapered Shanks
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, Tool HoldersADJ HSK A-ER DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Tapered Shanks
- DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Tapered Shanks.
SKU: ADJ HSK A-ER DIN6499 ER Collet Chucks with Center Alignment (FINEFIT) and HSK DIN69893/A Tapered Shanks -
Collet Chucks, DIN 6499, Tool Holders
ADJ ST-ER FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and Cylindrical Shanks with a Clamping Flat
Collet Chucks, DIN 6499, Tool HoldersADJ ST-ER FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and Cylindrical Shanks with a Clamping Flat
- FINEFIT DIN 6499 ER collet chucks with center alignment and cylindrical shanks with a clamping flat.
SKU: ADJ ST-ER FINEFIT DIN 6499 ER Collet Chucks with Center Alignment and Cylindrical Shanks with a Clamping Flat -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30 ER Collet Chucks(Balanced)
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersBT30 ER Collet Chucks(Balanced)
- BT30 ER Collet Chucks(Balanced)
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks(Balanced) -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT30/40 0.005mm ER32/25/20/16/11 CNC Milling Machine Chuck Tool Carrier Collet Chuck Holder Toolholder Milling Lathe
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersBT30/40 0.005mm ER32/25/20/16/11 CNC Milling Machine Chuck Tool Carrier Collet Chuck Holder Toolholder Milling Lathe
- BT30/40 0.005mm ER32/25/20/16/11 CNC Milling Machine Chuck Tool Carrier Collet Chuck Holder Toolholder Milling Lathe
SKU: 4000609525713 -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT40 ER Collet Chucks
- Tool holding device: BT40.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT40 ER Collet Chucks -
Clamping Technology, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
BT50 ER Collet Chucks
- Tool holding device: BT50.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT50 ER Collet Chucks -
CAMFIX ISO 26623-1, Collet Chucks, Tool Holders
C#-ER DIN 6499 ER Collet Chucks with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks
CAMFIX ISO 26623-1, Collet Chucks, Tool HoldersC#-ER DIN 6499 ER Collet Chucks with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks
- DIN 6499 ER Collet Chucks with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks.
SKU: C#-ER DIN 6499 ER Collet Chucks with CAMFIX (ISO 26623-1) Exchangeable Tapered Shanks -
CAMFIX ISO 26623-1, Collet Chucks, Tool Holders
C#-ER-M DIN 6499 ER Long Mini Collet Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks
CAMFIX ISO 26623-1, Collet Chucks, Tool HoldersC#-ER-M DIN 6499 ER Long Mini Collet Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks
- DIN 6499 ER Long Mini Collet Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks.
SKU: C#-ER-M DIN 6499 ER Long Mini Collet Chucks with CAMFIX (ISO 26623-1 standard) Exchangeable Tapered Shanks -
Collet Chucks, DIN 6499, Tool Holders
CDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations
Collet Chucks, DIN 6499, Tool HoldersCDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations
- DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations.
-
When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
-
Apply appropriate tightening torque to eliminate a gap between the mating faces.
-
Estimated torque values are specified in the TQ_3 parameter.
SKU: CDP ER-M DIN 6499 ER Collet Chucks with Threaded FLEXFIT Adaptations -
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder (CTA)
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder (CTA)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder (CTA) -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder for high-speed (CTH)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder for high-speed (CTH) -
Collet Chucks, Tool Holders
DETa-1 Collet
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder A type (DTA)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder A type (DTA) -
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder E type (DTE)
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersDETa-1 Collet Holder E type (DTE)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder E type (DTE) -
-
Collet Chucks, DIN 69871 SK30/SK40/SK50, Tool Holders
DIN69871-ER-SHORT Short Front End ER Collet Chucks with DIN 69871 Form AD Tapered Shanks
Collet Chucks, DIN 69871 SK30/SK40/SK50, Tool HoldersDIN69871-ER-SHORT Short Front End ER Collet Chucks with DIN 69871 Form AD Tapered Shanks
- Short Front End ER Collet Chucks with DIN 69871 Form AD Tapered Shanks.
SKU: DIN69871-ER-SHORT Short Front End ER Collet Chucks with DIN 69871 Form AD Tapered Shanks