Tool Holders
Showing 1–30 of 64 results
-
-
-
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder (CTA)
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder (CTA)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder (CTA) -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder for high-speed (CTH)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder for high-speed (CTH) -
Collet Chucks, Tool Holders
DETa-1 Collet
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder A type (DTA)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder A type (DTA) -
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder E type (DTE)
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersDETa-1 Collet Holder E type (DTE)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder E type (DTE) -
DIN 69893 HSK-A, HSK-E, HSK-F, Face Mill Arbor, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
FMH Rigid type (FMH-H)
DIN 69893 HSK-A, HSK-E, HSK-F, Face Mill Arbor, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersFMH Rigid type (FMH-H)
- The large-diameter carbide core is integrated into the thick body by shrink-fitting.
- Achieves less deflection and higher efficiency during long-gauge machining.
- Double the machining efficiency(compared to conventional holders).
SKU: FMH Rigid type (FMH-H) -
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool Holders
Hyper Version Heavy-duty Type
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool HoldersHyper Version Heavy-duty Type
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Hyper Version Heavy-duty Type -
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool Holders
Hyper Version Short Type
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool HoldersHyper Version Short Type
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Hyper Version Short Type -
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool Holders
Master Holder 12 Type
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool HoldersMaster Holder 12 Type
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Master Holder 12 Type -
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool Holders
Master Holder 6 Type
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool HoldersMaster Holder 6 Type
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Master Holder 6 Type -
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool Holders
Master Holder 8 Type
DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Shrink Fit Chuck, Tool HoldersMaster Holder 8 Type
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Master Holder 8 Type -
-
-
DIN 69893 HSK-A, HSK-E, HSK-F, Shrink Fit Chuck, Tool Holders
Mono 3° A40
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Mono 3° A40 -
DIN 69893 HSK-A, HSK-E, HSK-F, Shrink Fit Chuck, Tool Holders
Mono 3° E25
- Low-temperature shrinking. Prevent accuracy loss due to over-heating.
- High-quality machining surface and Extended tool life.
- Ideal for high-speed spindle rotation.
- Securely evacuate chips and cool down cutters.
SKU: Mono 3° E25 -