MST
Showing 1–30 of 81 results
-
-
-
-
-
-
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder (CTA)
ASME B5.50 CAT40/CAT50, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder (CTA)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder (CTA) -
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersCollet Holder for high-speed (CTH)
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
SKU: Collet Holder for high-speed (CTH) -
Collet Chucks, Tool Holders
DETa-1 Collet
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet -
Collet Chucks, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder A type (DTA)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder A type (DTA) -
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
DETa-1 Collet Holder E type (DTE)
ASME B5.50 CAT40/CAT50, Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersDETa-1 Collet Holder E type (DTE)
- Slim and compact without the nut at the tip and minimize interference with work-piece and jig fixture.
- With their optimal collapsibility, these collets make it possible to reduce the number of collets you need by 90%, compared to our former products.
SKU: DETa-1 Collet Holder E type (DTE) -
Clamping Technology, Work Holder
Dovetail Clamping Working Holder
- It clamps a workpiece strongly with minimun clamping length.
- It allows strong work-piece clamping even when ther is alimited clamping area when performing simple additional machining(dovetail machining) on the work-piece.
SKU: Dovetail Clamping Working Holder -
Clamping Technology, Work Holder
Dovetail Vise Clamping Working Holder
- Dovetail grooving of the work-piece clamping area using an angular cutting is required prior to machining. After machining, cut off the dovetail of the work-piece.
- Work-piece clamping jaws move individually.
- Please use the screw hole on the top face as necessary.
SKU: Dovetail Vise Clamping Working Holder -
DIN 69893 HSK-A, HSK-E, HSK-F, Face Mill Arbor, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
FMH Rigid type (FMH-H)
DIN 69893 HSK-A, HSK-E, HSK-F, Face Mill Arbor, JIS (MAS 403) BT30/BT40/BT50, Tool HoldersFMH Rigid type (FMH-H)
- The large-diameter carbide core is integrated into the thick body by shrink-fitting.
- Achieves less deflection and higher efficiency during long-gauge machining.
- Double the machining efficiency(compared to conventional holders).
SKU: FMH Rigid type (FMH-H)