ISCAR
Showing 61–90 of 2276 results
-
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
- 90° face mills carrying HP AD.. 2207… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw.
- In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HP AD.. 2207... Long Edged Inserts HP F90AT-22 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
- HELIPLUS, 90° fine pitch face mills carrying HP ANKT 0702.. inserts.
- Insert tightening torque: 0.62 Nxm.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1106… Tangentially Clamped Inserts F90LN-N11
- 90° face mills carrying LN..1106… tangentially clamped inserts.
- Fine pitch.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1106... Tangentially Clamped Inserts F90LN-N11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying LN..1506… Tangentially Clamped Inserts F90LN-N15
- 90° face mills carrying LN..1506… tangentially clamped inserts.
- Left-hand cutters are designated by a red groove.
- Number of inserts.
SKU: 90° Face Mills Carrying LN..1506... Tangentially Clamped Inserts F90LN-N15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying S/X/ QPMT 1004… Inserts F90SP-10
- HELIQUAD, 90° face mills carrying S/X/QPMT 1004… inserts.
- Fine pitch.
- D is 0.2 mm larger when QPMT inserts are used.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying S/X/ QPMT 1004... Inserts F90SP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1004… Tangentially Clamped Inserts T290 FLN-10
- SUMOMILL, 90° face mills carrying tangentially clamped, T290 LNMT 1004… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1004... Tangentially Clamped Inserts T290 FLN-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T290 LNMT 1506… Tangentially Clamped Inserts T290 FLN-15
- 90° face mills carrying tangentially clamped, T290 LNMT 1506… inserts with 2 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T290 LNMT 1506... Tangentially Clamped Inserts T290 FLN-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T490 LN#T 11… Tangentially Clamped Inserts T490 FLN-11
- 90° face mills carrying T490 LN#T 11… tangentially clamped inserts.
-
Important: Maximum clamping torque 3.2 N*m.
- Number of inserts.
- Maximum ramping angle – valid only with T490 LNHT 1106PNTR-RD insert.
SKU: 90° Face Mills Carrying T490 LN#T 11... Tangentially Clamped Inserts T490 FLN-11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying T890 LN.T 1306… Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13
- 90° face mills carrying T890 LN.T 1306… tangentially clamped inserts with 8 cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying T890 LN.T 1306... Tangentially Clamped Inserts with 8 Cutting Edges T890HT FLN-R13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13
- HELITANG T490 Line, 90° face mills carrying T490 LNMT/LNHT 13… tangentially clamped inserts with 4 helical 13 mm long cutting edges.
- When machining slots, coarse pitch cutters should be used.
- Number of inserts.
- Maximum ramping angle – valid only when the T490 LNHT 1306 PNTR-RD insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 13 mm Long Cutting Edges T490 FLN-13 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16
- HELITANG T490 Line, 90° face mills carrying T490 LNMT 16… tangentially clamped inserts with 4 helical 16 mm long cutting edges.
- When machining slots, regular pitch cutters should be used.
- Fine pitch.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying Tangentially Clamped Inserts with 4 Helical 16 mm Long Cutting Edges T490 FLN-16 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08
- 90° face mills with CAMFIX (ISO 26623-1 standard) tapered shanks, carrying tangentially clamped inserts.
- Number of inserts.
SKU: 90° Face Mills with CAMFIX Shanks Carrying Tangentially Clamped Inserts T490 FLN-C#-08 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills with Tangentially Clamped Inserts T490 FLN-08
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills with Tangentially Clamped Inserts T490 FLN-08
- 90° face mills with tangentially clamped inserts.
-
When machining slots, regular pitch cutters should be used.
- Fine pitch.
- Extra fine pitch.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills with Tangentially Clamped Inserts T490 FLN-08