DESKAR
Showing 211–240 of 284 results
-
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
Grooving inserts MRMN-M
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Grooving inserts MRMN-M -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
Grooving inserts TGF R/L
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Grooving inserts TGF R/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABS-40F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABS-40F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABW-40F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABW-40F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tool SABW-50F Type
- The cutting effect is the best when the tool tip is kept slightly below the center line.
- The cutting speed changes constantly in the process of cutting, especially when cutting, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tool SABW-50F Type -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools CGBR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools CGBR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools DBH
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools DBH -
Face grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools FGHH/FGVH
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools FGHH/FGVH -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools GGB R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools GGB R/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools KTGFR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools KTGFR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools MGEHR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools MGEHR/L -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools MGIVR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools MGIVR/L -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools S-KTGFR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools S-KTGFR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SGB R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SGB R/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SGTR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SGTR/L -
Indexable Tools, Parting And Grooving Tools
Grooving Tools SMBB
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SMBB -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools SNGR/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SNGR/L -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools SPB
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools SPB -
Indexable Tools, Internal grooving, Parting And Grooving Tools
Grooving Tools STGFS
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools STGFS -
External grooving, Indexable Tools, Parting And Grooving Tools
Grooving Tools ZQ R/L
- The technological characteristics of slotting cutter are that one main cutting edge and two auxiliary cutting edges participate in three side cutting at the same time.
- The material to be cut has complex plastic deformation, high friction resistance, small feed rate, thin cutting thickness, large average deformation and increased unit cutting force.
- The cutting speed changes constantly in the process of machining, especially when cutting off, the cutting speed changes from maximum to zero.
- Cutting force and cutting heat are also changing.
SKU: Grooving Tools ZQ R/L -
Face milling, Indexable Tools, Milling Tools
KM-45 Face Milling Cutter Bar
- It is used for vertical milling machine, end milling machine, gantry milling machine and upper processing plane.
- There are cutter teeth on the end face and circumference, and there are also coarse teeth and fine teeth.
- Three side edge milling cutter: it is used to process all kinds of groove and step surface. There are cutter teeth on both sides and circumference.
SKU: KM-45 Face Milling Cutter Bar -
Face milling, Indexable Tools, Milling Tools
KM-45° Face Milling Cutter
- Suitable for steel parts, castings, aluminum parts, a variety of material blade, suitable for a wide range.
- Large chip holding space, good chip removal.
- It can be done with a flat milling finish.
- Large front angle, small cutting load.
SKU: KM-45° Face Milling Cutter -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts APKT-AL
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts APKT-AL -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts APMT-H
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts APMT-H -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts APMT-M
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts APMT-M -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts APMT-XM
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts APMT-XM -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts SE1204
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts SE1204 -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts SPMG-DG
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts SPMG-DG -
Indexable Tools, Milling Inserts, Milling Tools
Milling Inserts SPMG-DK
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel.
- It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: Milling Inserts SPMG-DK