Heat-resistant Alloy and Titanium Alloy (S)
Showing 241–270 of 1027 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG-NF Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG-NF Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications
- Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications.
SKU: DNMG-NF Double-Sided 55° Rhombic Inserts for Semi-Finishing and Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG-VL Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG-VL Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves
- Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves.
SKU: DNMG-VL Double-Sided 55° Rhombic Inserts with a Chipformer for High Temperature Alloys and Stainless Steel Valves -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG-WG Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG-WG Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning
- Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning.
SKU: DNMG-WG Double-Sided 55° Rhombic Wiper Inserts for High Surface Finish at High Feed Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions
- 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions.
SKU: DNMG/DNGG-PP 55° Double-Sided Rhombic Inserts for Machining Very Ductile Materials at Medium Cutting Conditions -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut
- Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut.
SKU: DNMG/DNGG-SF Double-Sided 55° Rhombic Inserts for Super-Finishing; Controls Chip Flow at Very Low Feeds and Depths of Cut -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSDNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
- Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions.
SKU: DNMG/DNGG-TF Double-Sided 55° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions -
Indexable Tools, Turning Inserts, TURNING TOOLS
DNMX-M3P Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates
Indexable Tools, Turning Inserts, TURNING TOOLSDNMX-M3P Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates
- Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates.
SKU: DNMX-M3P Double-Sided 55° Rhombic Inserts with High Helical Cutting Edge for High Metal Removal Rates -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-2D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-2D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD.
- The new drills are available in drilling depth to diameter ratio of 2xD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-2D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-2D-N(continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-2D-N(continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD
- Indexable Square Insert Drills with coolant holes, drilling depth 2xD.
- The new drills are available in drilling depth to diameter ratio of 2xD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-2D-N(continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 2xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-3D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-3D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD.
- The new drills are available in drilling depth to diameter ratio of 3xD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-3D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 3xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-4D-N ( continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-4D-N ( continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD.
- The new drills are available in drilling depth to diameter ratio of 4XD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-4D-N ( continued) Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-4D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-4D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD.
- The new drills are available in drilling depth to diameter ratio of 4XD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-4D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 4xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-4D-T Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-4D-T Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD
- Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD.
- The new drills are made from steel that features body hardness up to 55 HRc and a HARD TOUCH nickel coating for better wear resistance and smooth chip flow.
- They feature a shallow helix angle and reinforced body structure, which provides excellent tool performance and easy chip evacuation on lathe applications.
- This line contains drill diameters which cover the diameter range from 14 to 60 mm.
SKU: DR-4D-T Indexable Insert Drills for Non-Rotating Applications with Coolant Holes and One Flat Shank, Drilling Depth 4xD -
Drilling Tools, Indexable insert drills, Indexable Tools
DR-5D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD
Drilling Tools, Indexable insert drills, Indexable ToolsDR-5D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD
- Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD.
- The new drills are available in drilling depth to diameter ratio of 5XD and in a diameter range of 12 to 60 mm.
- The new drills are available in whole metric sizes as well as half sizes in the above-mentioned range.
- It shows a substantial advantage over the current grades being used and should be used for the outer pocket on DR drills.
SKU: DR-5D-N Indexable Square Insert Drills with Coolant Holes, Drilling Depth 5xD -
Ball Nose, Solid Milling, Solid round tools
EB-A-4 (medium length) 4 Flute, 30° Helix Medium Length Solid Carbide Ball Nose Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A-4 (medium length) 4 Flute, 30° Helix Medium Length Solid Carbide Ball Nose Endmills
- 4 flute, 30° helix medium length solid carbide ball nose endmills.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A-4 (medium length) 4 Flute, 30° Helix Medium Length Solid Carbide Ball Nose Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A-4 (short length) 4 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A-4 (short length) 4 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills
- 4 flute, 30° helix short solid carbide ball nose endmills.
- Short and stable design for profiling (finishing).
- Number of flutes.
- C-Cylindrical.
SKU: EB-A-4 (short length) 4 Flute, 30° Helix Short Solid Carbide Ball Nose Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills
- SOLIDECO – economical type 2 flute, 30° helix ball nose solid carbide endmills.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: EB-A2 (economical) Economical Type 2 Flute, 30° Helix Ball Nose Solid Carbide Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (extra long) 2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC
Ball Nose, Solid Milling, Solid round toolsEB-A2 (extra long) 2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC
- 2 flute, 30° helix extra long solid carbide ball nose endmills for materials up to 65 HRC.
- The DC tolerance is: 0 – -0.030 mm.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (extra long) 2 Flute, 30° Helix Extra Long Solid Carbide Ball Nose Endmills for Materials up to 65 HRC -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (long with neck) 2 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC
Ball Nose, Solid Milling, Solid round toolsEB-A2 (long with neck) 2 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC
- 2 flute, 30° helix long solid carbide ball nose endmills with relieved necks for materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (long with neck) 2 Flute, 30° Helix Long Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (precision stub cut) 2 Flute, 30° Helix Stub Cut Length High Precision Ball Nose Endmills with Relieved Necks
Ball Nose, Solid Milling, Solid round toolsEB-A2 (precision stub cut) 2 Flute, 30° Helix Stub Cut Length High Precision Ball Nose Endmills with Relieved Necks
- 2 flute, 30° helix stub cut length high precision ball nose endmills with relieved necks for materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (precision stub cut) 2 Flute, 30° Helix Stub Cut Length High Precision Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (rib processing) (continued) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc
Ball Nose, Solid Milling, Solid round toolsEB-A2 (rib processing) (continued) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc
- 2 flute, 30° helix rib processing solid carbide ball nose endmills for materials up to 55 HRc.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (rib processing) (continued) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (rib processing) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc
Ball Nose, Solid Milling, Solid round toolsEB-A2 (rib processing) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc
- 2 flute, 30° helix rib processing solid carbide ball nose endmills for materials up to 55 HRc.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (rib processing) 2 Flute, 30° Helix Rib Processing Solid Carbide Ball Nose Endmills for Materials up to 55 HRc -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (stub cut length) 2 Flute, 30° Helix Stub Cut Length Ball Nose Solid Carbide Endmills for Materials up to 55-70 HRC
Ball Nose, Solid Milling, Solid round toolsEB-A2 (stub cut length) 2 Flute, 30° Helix Stub Cut Length Ball Nose Solid Carbide Endmills for Materials up to 55-70 HRC
- 2 flute, 30° helix stub cut length ball nose solid carbide endmills for materials up to 55-70 HRC.
- ±0.01 tolerance.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (stub cut length) 2 Flute, 30° Helix Stub Cut Length Ball Nose Solid Carbide Endmills for Materials up to 55-70 HRC -
Ball Nose, Solid Milling, Solid round tools
EB-A2 (tapered flute & neck) 2 Tapered Flutes, 30° Helix Solid Carbide Ball Nose Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A2 (tapered flute & neck) 2 Tapered Flutes, 30° Helix Solid Carbide Ball Nose Endmills
- 2 tapered flutes, 30° helix solid carbide ball nose endmills with relieved necks for materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2 (tapered flute & neck) 2 Tapered Flutes, 30° Helix Solid Carbide Ball Nose Endmills with Relieved Necks for Materials up to 65 HRC -
Ball Nose, Solid Milling, Solid round tools
EB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills
- SOLIDECO – economical type 2 flute, 30° helix ball nose extra long solid carbide endmills.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A2(economical-extra long) Economical Type 2 Flute, 30° Helix Ball Nose Extra Long Solid Carbide Endmills -
Ball Nose, Solid Milling, Solid round tools
EB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills
Ball Nose, Solid Milling, Solid round toolsEB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills
- SOLIDECO – economical type 4 flute, 30° helix ball nose short solid carbide endmills.
- Number of flutes.
- C-Cylindrical.
SKU: EB-A4 (economical-short) Economical Type 4 Flute, 30° Helix Ball Nose Short Solid Carbide Endmills -
Ball Nose, Solid Milling, Solid round tools
EBRF-T 3, 4 Flute, 20° Helix Long Solid Carbide Ball Nose Endmills for Roughing Materials up to 55 HRC
Ball Nose, Solid Milling, Solid round toolsEBRF-T 3, 4 Flute, 20° Helix Long Solid Carbide Ball Nose Endmills for Roughing Materials up to 55 HRC
- 3, 4 flute, 20° helix long solid carbide ball nose endmills for roughing materials up to 55 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EBRF-T 3, 4 Flute, 20° Helix Long Solid Carbide Ball Nose Endmills for Roughing Materials up to 55 HRC -
Corner Radius, Solid Milling, Solid round tools
EC-A-4R 4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii
Corner Radius, Solid Milling, Solid round toolsEC-A-4R 4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii
- 4 flute, 30° helix medium length solid carbide endmills with various radii.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A-4R 4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Various Radii