Steel (P)
Showing 1–30 of 46 results
-
-
Ball Nose, Solid Milling, Solid round tools
Alloy Ball Nose End Mill No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Ball Nose End Mill No.2 -
Corner Radius, Solid Milling, Solid round tools
Alloy Corner Radius End Mill No.1
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- TiAN nano coating.
SKU: Alloy Corner Radius End Mill No.1 -
Corner Radius, Solid Milling, Solid round tools
Alloy Corner Radius End Mill No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Corner Radius End Mill No.2 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.1
- Super fine grain alloy bar, sharp edge, light cutting.
- It is used for processing steel and stainless steel below HRC50.
- It can also be used for copper, nickel alloy, titanium alloy, aluminum and other materials processing.
- TiAIN Nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.1 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.2 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.3
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.3 -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-CQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-CQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-CQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-HQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-HQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-HQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-PM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-PM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-PM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-PR
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-PR
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-PR -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-TM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-TM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-TM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-CQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-CQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-CQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-HQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-HQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-HQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-PM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-PM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-PM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-PR
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-PR
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-PR -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-TM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-TM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-TM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-PM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-PM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) SNMG-PM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-PR
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-PR
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) SNMG-PR -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-TM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-TM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) SNMG-TM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-CM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-CM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-CM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-CQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-CQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-CQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-HQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-HQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-HQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-PM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-PM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-PM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-PR
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-PR
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-PR -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-S
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-S
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-S -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-TM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-TM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-TM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) VNMG-HQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) VNMG-HQ
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) VNMG-HQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) VNMG-PM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) VNMG-PM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) VNMG-PM -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) VNMG-TM
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) VNMG-TM
- Suitable for finishing and semi-finishing of carbon steel and alloy steel, with better wear resistance than 9018.
- It is widely used in the processing of carbon steel and alloy steel, with a wide processing range, and is the first choice for steel processing.
SKU: General cemented carbide inserts(Negative inserts) VNMG-TM