Aluminium (N)
Showing 61–90 of 460 results
-
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert (thin type) for external threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert (thin type) for external threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert (thin type) for external threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert (thin type) for internal threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert (thin type) for internal threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert (thin type) for internal threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert for external threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert for external threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert for external threading(inch) -
Indexable Tools, Thread turning, THREADING TOOLS
British standard taper pipe threading insert for internal threading(inch)
Indexable Tools, Thread turning, THREADING TOOLSBritish standard taper pipe threading insert for internal threading(inch)
- Specially treated edge for superior surface quality.
- Sharp nose with small cutting resistance and superior performance.
- Full ground inserts with high dimensional precision for high quality threading.
SKU: British standard taper pipe threading insert for internal threading(inch) -
-
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
- Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum.
SKU: CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
- Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials
Indexable Tools, Turning Inserts, TURNING TOOLSCNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials
- Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials.
SKU: CNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials
Indexable Tools, Turning Inserts, TURNING TOOLSCNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials
- Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials.
SKU: CNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications
- 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications.
SKU: CNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron
- Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron.
SKU: CNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMG/CNGG-TF Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
Indexable Tools, Turning Inserts, TURNING TOOLSCNMG/CNGG-TF Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions
- Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions.
SKU: CNMG/CNGG-TF Double-Sided 80° Rhombic Inserts for Machining a Wide Range of Materials at Medium Cutting Conditions -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCGT-AF Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing on Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSDCGT-AF Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing on Aluminum
- Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing on Aluminum.
SKU: DCGT-AF Inserts with a Very Positive Rake Angle and Sharp Cutting Edge for Semi-Finishing and Finishing on Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSDCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: DCGT-AS 55° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT (PCD) 55° Rhombic Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT (PCD) 55° Rhombic Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Applications
- 55° Rhombic Inserts with a PCD Single Top Corner Tip, 7° Cl earance and Positive Rake Angle for Finishing Applications.
SKU: DCMT (PCD) 55° Rhombic Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
DCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSDCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys
- 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys.
SKU: DCMT-14 55° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finish Turning on Soft Materials and Exotic Alloys -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds
- Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds.
SKU: DGN-UT/UA Double-Sided Inserts for Parting and Grooving Cr-Ni Alloys, Low Carbon Steel and Ductile Materials at Low Feeds -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications
- Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGR/L-C DGRC/LC-C Double-Sided Inserts for Parting Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
SKU: DGR/L-J/JS Double-Sided Inserts for Parting Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
