Stainless Steel (M)
Showing 1–30 of 58 results
-
-
Ball Nose, Solid Milling, Solid round tools
Alloy Ball Nose End Mill No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Ball Nose End Mill No.2 -
Corner Radius, Solid Milling, Solid round tools
Alloy Corner Radius End Mill No.1
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- TiAN nano coating.
SKU: Alloy Corner Radius End Mill No.1 -
Corner Radius, Solid Milling, Solid round tools
Alloy Corner Radius End Mill No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Corner Radius End Mill No.2 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.1
- Super fine grain alloy bar, sharp edge, light cutting.
- It is used for processing steel and stainless steel below HRC50.
- It can also be used for copper, nickel alloy, titanium alloy, aluminum and other materials processing.
- TiAIN Nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.1 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.2
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.2 -
Solid Milling, Solid round tools, Square
Alloy Flat End Mill (2-edged, 4-edged) No.3
- Super fine grain alloy bar with high wear resistance.
- It is used for steel processing below HRC60.
- It can also be used for processing stainless steel and other materials.
- Composite nano coating.
SKU: Alloy Flat End Mill (2-edged, 4-edged) No.3 -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-GS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-GS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) CNMG-GS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-HA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-HA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) CNMG-HA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-HS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-HS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) CNMG-HS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-MA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-MA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) CNMG-MA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) CNMG-MS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) CNMG-MS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
- The inserts has high-quality wear resistance and toughness, suitable for ordinary iron, ductile iron, finishing and semi-finishing.
SKU: General cemented carbide inserts(Negative inserts) CNMG-MS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-GS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-GS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) DNMG-GS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-HA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-HA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) DNMG-HA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-HS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-HS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) DNMG-HS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-MA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-MA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) DNMG-MA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) DNMG-MS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) DNMG-MS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
- The inserts has high-quality wear resistance and toughness, suitable for ordinary iron, ductile iron, finishing and semi-finishing.
SKU: General cemented carbide inserts(Negative inserts) DNMG-MS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-GS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-GS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) SNMG-GS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-HA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-HA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) SNMG-HA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-HS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-HS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) SNMG-HS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-MA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-MA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) SNMG-MA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-MS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-MS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
- The inserts has high-quality wear resistance and toughness, suitable for ordinary iron, ductile iron, finishing and semi-finishing.
SKU: General cemented carbide inserts(Negative inserts) SNMG-MS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) SNMG-S
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) SNMG-S
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) SNMG-S -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-GS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-GS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-GS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-HA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-HA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-HA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-HS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-HS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-HS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-JMS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-JMS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-JMS -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-MA
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-MA
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-MA -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-MQ
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-MQ
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
SKU: General cemented carbide inserts(Negative inserts) TNMG-MQ -
Indexable Tools, Turning Inserts, TURNING TOOLS
General cemented carbide inserts(Negative inserts) TNMG-MS
Indexable Tools, Turning Inserts, TURNING TOOLSGeneral cemented carbide inserts(Negative inserts) TNMG-MS
- Special grades for stainless steel processing, ultra-fine alloy grades, with excellent toughness and adhesion resistance to the coating, suitable for processing stainless steel, especially austenitic stainless steel. It is also suitable for cutting heat-resistant alloy steel at low speed.
- The inserts has high-quality wear resistance and toughness, suitable for ordinary iron, ductile iron, finishing and semi-finishing.
SKU: General cemented carbide inserts(Negative inserts) TNMG-MS