Hole tolerance: H7 manufacturing tolerance according to DIN1420.
Available grades: IC07 – uncoated, optional: IC907 – TiAlN PVD coated.
Special diameters are available on request.
Reamers, REAMING, Solid round tools
RM-FCR-H7S-CS-C DIN 212C Solid Carbide Reamers with Straight Flutes and a Cylindrical Shank for Blind Holes
Availability:
200 in stock
- DIN 212C Solid Carbide Reamers with Straight Flutes and a Cylindrical Shank for Blind Holes.
- Durable (produced from submicron fine carbide grain).
- Good solution for old machines.
- Suitable for low cutting speeds and feeds.
- Economical for small production batches.
- Easily regrindable.
- Mostly used with floating adapters.
- Coated for high cutting speeds (upon request).
- With internal coolant supply (upon request).
- PCD – for nonferrous materials (upon request).
- CBN – for hard materials (upon request).
- Cermet – for superior performance in steel (upon request).
- Combined and stepped reamers (upon request).
- Integral and modular (upon request).
- Special diameter range 1 mm (.039) and up.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Aluminium (N), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M) |
Based on 0 reviews
Be the first to review “RM-FCR-H7S-CS-C DIN 212C Solid Carbide Reamers with Straight Flutes and a Cylindrical Shank for Blind Holes”
Related products
-
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS UA100-SL3 3 Flute, Long Flute Length
● Suitable for aluminum alloy (Si ≤ 12%) and copper alloy (< 200HB) general
processing.
● Special edge design prevents vibration and effectively solves the crumbs.
● Water cooling is the best cooling method.SKU: UA100-SL3 3 Flute, Long Flute Length -
Solid round tools, Solid Milling, Roughing, Square
SOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, Roughing, SquareSOLID CARBIDE ENDMILLS UPR100-S4 4 Flute Square End, With Roughing Geometry
- Suitable for Roughing of ordinary steel and cast iron materials (≤48HRC).
- Special edge chipbreaker treatment, suitable for rough machining of grooves and side walls of workpieces.
SKU: UPR100-S4 4 Flute Square End, with Roughing Geometry -
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
Solid round tools, Solid Milling, SquareSOLID CARBIDE ENDMILLS SS200-CS4 4 Flute, Stub Length With Variable Helix
● Suitable for high efficiency efficient rough milling and
semi-finishing milling of stainless steel（＜280HB）.
● Variable Bottom edge variation and unequal helix angle
and unequal flute pitch have with excellent anti-vibration
capacity, and ensure high surface precision.
● Applicable for high efficiencyt machining at large cutting
depth (ap), large cutting width (ae), with high metal removal
rate.SKU: SS200-CS4 4 Flute, Stub Length with variable Helix -
Solid round tools, Solid Milling, Corner Radius, Square
SOLID CARBIDE ENDMILLS US200-R3 3 Flute Corner Radius
Solid round tools, Solid Milling, Corner Radius, SquareSOLID CARBIDE ENDMILLS US200-R3 3 Flute Corner Radius
● Suitable for general machining of stainless steel
(<280HB).
● Special edge design effectively solves the crumbs.
● Water，oil cooling are the best cooling methods.SKU: US200-R3 3 Flute Corner Radius
There are no reviews yet.