SKU: Nut for Collect Holder (CTA)
Categories: Accessories for Toolholder, Tool Holders
Accessories for Toolholder, Tool Holders
Nut for Collect Holder (CTA)
Availability:
200 in stock
- Nut is a nut, which is used to tighten with bolt or screw. It is a necessary component of all production and manufacturing machinery.
- The nut is a part that closely connects the mechanical equipment.
- Only through the internal thread, the nuts and bolts of the same specification can be connected together.
Based on 0 reviews
Be the first to review “Nut for Collect Holder (CTA)”
Related products
-
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: HSK100A ER Collet Chucks -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
TMG21 Main Handle Module
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FTMG21 Main Handle Module
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: TMG21 Main handle module
There are no reviews yet.