SKU: MORSE TAPER HOLDER TYPE A SHANK (Tang Type) HSK A63 & A100
Categories: DIN 69893 HSK-A, HSK-E, HSK-F, Morse Taper Adapters, Tool Holders
DIN 69893 HSK-A, HSK-E, HSK-F, Morse Taper Adapters, Tool Holders
MORSE TAPER HOLDER TYPE A SHANK (Tang Type) HSK A63 & A100
Availability:
200 in stock
- MORSE TAPER HOLDER TYPE A SHANK (Tang Type) HSK A63 & A100.
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “MORSE TAPER HOLDER TYPE A SHANK (Tang Type) HSK A63 & A100”
Related products
-
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: HSK100A ER Collet Chucks -
Clamping Technology, Tool Holders, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50
BT30 ER Collet Chucks（Balanced）
Clamping Technology, Tool Holders, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50BT30 ER Collet Chucks（Balanced）
- BT30 ER Collet Chucks（Balanced）
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks（Balanced） -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders
There are no reviews yet.