SKU: MEGA E Collet
Categories: Accessories for Toolholder, Tool Holders
Accessories for Toolholder, Tool Holders
MEGA E Collet
Availability:
200 in stock
- MEGA E Collet Collet accuracy (Class AA).
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “MEGA E Collet”
Related products
-
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-FSide Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: Side Lock Holders -
Clamping Technology, Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK V Holders
Clamping Technology, Tool Holders, Quick Change Tapping Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK V Holders
- HSK V Holders 63-100A.
- Bore holes for data carriers according to DIN 69893.
- Improve tap life by 85% or more.
- Improve processing life 2-4 times.
- Improve thread accuracy and surface quality.
- First choice for extrusion taps.
- Suitable for processing inch threads.
SKU: HSK V Holders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-F Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-F Shrink Fit Toolholders
- Tool holding device: HSK63F .
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-F Shrink Fit Toolholders
There are no reviews yet.