• DMIN=(min bore diameter)=(DCN+BD+1)/2 • BD=Size of the boring head being used
(1) Suitable boring heads
(2) Cutting diameter minimum
(3) Cutting diameter maximum
Boring and Reaming Tools, Fine boring tools, Indexable Tools
IHRF-BW Back Face Turning Toolholders for BHF and TCH AL Fine Boring Heads
Availability:
200 in stock
- Back Face Turning Toolholders for BHF and TCH AL Fine Boring Heads.
Based on 0 reviews
Be the first to review “IHRF-BW Back Face Turning Toolholders for BHF and TCH AL Fine Boring Heads”
You may also like…
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
BHF MB16-MB50 Dia. 2.5-108 Fine Boring Heads with 2 μm Direct Diametric Adjustment for a Diameter Range of 2.5 up to 108 mm
Indexable Tools, Boring and Reaming Tools, Fine boring toolsBHF MB16-MB50 Dia. 2.5-108 Fine Boring Heads with 2 μm Direct Diametric Adjustment for a Diameter Range of 2.5 up to 108 mm
- Fine Boring Heads with 2 µm Direct Diametric Adjustment for a Diameter Range of 2.5 up to 108 mm.
SKU: BHF MB16-MB50 Dia. 2.5-108 Fine Boring Heads with 2 μm Direct Diametric Adjustment for a Diameter Range of 2.5 up to 108 mm -
Indexable Tools, TURNING TOOLS, Turning Inserts
CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, TURNING TOOLS, Turning InsertsCCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
There are no reviews yet.