• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) • The orientation pins can be removed, turning the toolholder into a standard HSK F63 type
* Optional, should be ordered separately
DIN 69893 HSK-A, HSK-E, HSK-F, Shell Mill Holders, Tool Holders
HSK FM-SEM Shell Mill Adapters with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG
Availability:
200 in stock
- Shell Mill Adapters with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG.
Based on 0 reviews
Be the first to review “HSK FM-SEM Shell Mill Adapters with HSK DIN69893 FM Tapered Shanks with Two Pins for MAKINO Machine Models MAG”
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
Soltting Cutter Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-F Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-F Shrink Fit Toolholders
- Tool holding device: HSK63F .
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-F Shrink Fit Toolholders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-A Shrink Fit Toolhoders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-A Shrink Fit Toolhoders
- Tool holding device: HSK 63A.
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-A Shrink Fit Toolhoders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders
There are no reviews yet.