• Note: To enable clamping the part to be attached, first remove the cooling tube
* Optional, should be ordered separately
DIN 69893 HSK-A, HSK-E, HSK-F, Morse Taper Adapters, Tool Holders
HSK-C# CAMFIX (ISO 26623-1) Holders with HSK DIN 69893 Form A Tapered Shanks
Availability:
200 in stock
- CAMFIX (ISO 26623-1) Holders with HSK DIN 69893 Form A Tapered Shanks.
Based on 0 reviews
Be the first to review “HSK-C# CAMFIX (ISO 26623-1) Holders with HSK DIN 69893 Form A Tapered Shanks”
Related products
-
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-F Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-F Shrink Fit Toolholders
- Tool holding device: HSK63F .
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-F Shrink Fit Toolholders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
Soltting Cutter Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: ER Collet Chucks -
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders
There are no reviews yet.