• A cooling tube must be used with all coolant through HSK spindles (should be ordered separately) • Use only inductive heating device for SRKIN holders • Preset screw CX allows supply of coolant via JET channels – do not remove
(1) Adjustment screw hexagon key size
* Optional, should be ordered separately
DIN 69893 HSK-A, HSK-E, HSK-F, Shrink Fit Chuck, Tool Holders
HSK A-SRKIN-CX Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shank and Coolant Jet Channels along the Shank Bore
Availability:
200 in stock
- Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shank and Coolant Jet Channels along the Shank Bore.
Based on 0 reviews
Be the first to review “HSK A-SRKIN-CX Thermal Shrink Chucks with HSK DIN69893 Form A Tapered Shank and Coolant Jet Channels along the Shank Bore”
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: ER Collet Chucks -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
Soltting Cutter Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FSoltting Cutter Holders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Soltting Cutter Holders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-F Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-F Shrink Fit Toolholders
- Tool holding device: HSK63F .
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-F Shrink Fit Toolholders
There are no reviews yet.