Boring Bars, Indexable Tools, TURNING TOOLS
HFIR/L-MC Boring Bars for Internal Grooving and Turning
- Boring Bars for Internal Grooving and Turning.
- DGN & GRIP 4.. – 6.. inserts can be used only with right-hand tools, HGPL 4.. – 6.. inserts with left-hand tools.
- After initial groove, no limitation to widening groove outward or toward center.
Availability:
200 in stock
(1) Minimum cutting width
(2) Maximum cutting width
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “HFIR/L-MC Boring Bars for Internal Grooving and Turning”
You may also like…
-
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts
- Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts.
- No depth limit.
SKU: DGN-W Double-Sided Inserts with Central Ridged Chipformer for Parting and Grooving Hard Materials and Interrupted Cuts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications
- Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications.
- The feed values for grade IC20 should be decreased by 50%.
SKU: DGN/DGNC/DGNM-C Double-Sided Parting Inserts for Parting and Grooving Bars, Hard Materials and Tough Applications -
Grooving Inserts, Indexable Tools, Parting And Grooving Tools
DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Grooving Inserts, Indexable Tools, Parting And Grooving ToolsDGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
- Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds.
SKU: DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FM-CBH Large Diameter Boring Tool For Finishing
Indexable Tools, Boring and Reaming Tools, Fine boring toolsFM-CBH Large Diameter Boring Tool For Finishing
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH Large Diameter Boring Tool For Finishing -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH Finish Borng Tool
1.Each boring head with three different sizes insert holders for different boring ranges.
2.Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
3.Insert holder can be mounted in opposite direction to back boring.
4.Better connection between insert holder and tool body provides higher tool prigidty and working performance.
5.AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool lifeSKU: CBH Finish Borng Tool
There are no reviews yet.