(1) Minimum penetration diameter
(2) Maximum penetration diameter
(3) Maximum overhang
Face grooving, Indexable Tools, Parting And Grooving Tools
HFAIR/L-4 Adapters for Internal Face Grooving and Turning
Availability:
200 in stock
- Adapters for Internal Face Grooving and Turning.
- DGN & GRIP inserts can be used only with right-hand adapters, HGPL inserts with left-hand blades.
Based on 0 reviews
Be the first to review “HFAIR/L-4 Adapters for Internal Face Grooving and Turning”
You may also like…
-
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds
- Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds.
SKU: DGN-MF Double-Sided Inserts for Parting and Grooving Soft and Hard Materials at Medium Feeds -
Indexable Tools, Parting And Grooving Tools, Face grooving, Internal grooving
C#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters
Indexable Tools, Parting And Grooving Tools, Face grooving, Internal groovingC#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters
- Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters.
SKU: C#-HAD Holders with CAMFIX Exchangeable Tapered Shanks for Internal Facing Adapters -
Indexable Tools, Parting And Grooving Tools, Grooving Inserts
DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Indexable Tools, Parting And Grooving Tools, Grooving InsertsDGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
- Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts.
- JT chipformer has the basic positive configuration of the J-type and a reinforced negative frontal edge; most suitable for soft materials at low to medium feeds.
SKU: DGN/DGNM-J/JS/JT Double-Sided Inserts for Parting and Grooving Soft Materials, Parting Tubes, Small Diameters and Thin-Walled Parts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ10 Micro-boring Bar -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ Micro-boring Tool Kit
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ Micro-boring Tool Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ10/12/16 Micro-boring head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: DBJ10/12/16 Micro-boring head
There are no reviews yet.