• (1) Use 4 mm hex key for screw adjustment. • A cooling tube must be used with all coolant through HSK spindles (should be ordered separately).
DIN 69893 HSK-A, HSK-E, HSK-F, Morse Taper Adapters, Tool Holders
FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Tapered Shank for Specially Tailored Toolholders
Availability:
200 in stock
- FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Tapered Shank for Specially Tailored Toolholders.
Based on 0 reviews
Be the first to review “FINEFIT Center Alignment Shank and Base with a DIN69893 HSK Tapered Shank for Specially Tailored Toolholders”
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-F
TMG21 Main Handle Module
Clamping Technology, Tool Holders, Slotting Cutter Adapters, DIN 69893 HSK-A, HSK-E, HSK-FTMG21 Main Handle Module
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: TMG21 Main handle module -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-FSide Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: Side Lock Holders
There are no reviews yet.