Features
- Positive axial rake angle
- Ramping down capability
- Internal coolant holes directed to each cutting edge
- Special protective coating for uninterrupted chip flow and protection from corrosion and wear
Indexable Tools, Milling Inserts, Milling Tools
FFQ4 SOMT 1205 Milling Inserts
Availability:
500 in stock
- Square single-sided inserts with 4 cutting edges for fast feed milling.
- RM-HP- for interrupted cut and machining next to shoulders of austenitic stainless steel and high temperature alloys.
- RM-T- for interrupted cut and machining next to shoulders of steel, ferritic and martensitic stainless steel, cast iron and hardened steel.
- HP- for austenitic stainless steel and high temperature alloys.
- T- for steel, ferritic and martensitic stainless steel, cast iron and hardened steel.
- T20- for grey and nodular cast iron.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “FFQ4 SOMT 1205 Milling Inserts”
You may also like…
-
Indexable Tools, Milling Tools, Copy milling, contouring, Face milling, High-feed milling
FFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Indexable Tools, Milling Tools, Copy milling, contouring, Face milling, High-feed millingFFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
- Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges.
- Radius for programming 3.1 mm.
- To generate a straight surface without cusps, the width of cut must not exceed DC.
- For slot milling or machining with high tool overhang, the maximum depth of cut should be reduced by 50%.
SKU: FFQ4 D-12 Fast Feed Face Mills Carrying Single-Sided Inserts with 4 Cutting Edges
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-boring Bar
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-boring Bar -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH80 Micro-finishing Boring Tool
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: Micro-finishing Boring Tool -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ Micro-boring Tool Kit
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ Micro-boring Tool Kit
There are no reviews yet.