SKU: FF WOMT/WOCT Milling Inserts
Categories: Indexable Tools, Milling Inserts, Milling Tools
Indexable Tools, Milling Inserts, Milling Tools
FF WOMT/WOCT Milling Inserts
Availability:
500 in stock
- Arc cutting edge inserts for fast feed machining at small depths of cut.
- Designed with a cylinder on the bottom that is seated in a mating hole in the pocket (FEEDMILL).
- Radius for programming.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “FF WOMT/WOCT Milling Inserts”
You may also like…
-
Indexable Tools, Milling Tools, Copy milling, contouring, Face milling, High-feed milling
FF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation
Indexable Tools, Milling Tools, Copy milling, contouring, Face milling, High-feed millingFF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation
- Fast Feed Endmills with FLEXFIT Threaded Adaptation.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter.
SKU: FF EW-M Fast Feed Endmills with FLEXFIT Threaded Adaptation -
Indexable Tools, Milling Tools, Face milling, High-feed milling
FF EW-CF Fast Feed Endmills with CLICKFIT Shanks
Indexable Tools, Milling Tools, Face milling, High-feed millingFF EW-CF Fast Feed Endmills with CLICKFIT Shanks
- Fast Feed Endmills with CLICKFIT Shanks.
- Cutting diameter maximum.
- Number of inserts.
- Maximum ramping angle.
- Insert tightening torque.
- Master insert identification.
SKU: FF EW-CF Fast Feed Endmills with CLICKFIT Shanks
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH32P Micro-finishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-finishing Boring Kit -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH80 Micro-finishing Boring Tool
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: Micro-finishing Boring Tool -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
NBH2084 Micro-boring Head
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: NBH2084 Micro-boring Head -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar
There are no reviews yet.