SKU: ENHT 1004.. Milling Inserts
Categories: Indexable Tools, Milling Inserts, Milling Tools
Indexable Tools, Milling Inserts, Milling Tools
ENHT 1004.. Milling Inserts
Availability:
500 in stock
- Toroidal bull nose peripherally ground inserts with 4 cutting edges.
- Used for undercutting and for finish profiling on steep and poorly supported surfaces (TORMILL).
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “ENHT 1004.. Milling Inserts”
You may also like…
-
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling tools
E93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling toolsE93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts
- Bull Nose Endmills with MULTI-MASTER Threaded Adaptation Carrying Toroidal Inserts.
- Do not apply lubricant to the MULTI-MASTER threaded connection.
- The specified diameter is for inserts with a 1.0 mm radius.
- Number of inserts.
- Maximum ramping angle.
- Clamping wrench size.
- Master insert identification.
SKU: E93CN-MM Bull Nose Endmills with MULTIMASTER Threaded Adaptation Carrying Toroidal Inserts -
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling tools
E93CN Toroidal Bull Nose Endmills with CNHT…and ENHT… Inserts
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling toolsE93CN Toroidal Bull Nose Endmills with CNHT…and ENHT… Inserts
- Toroidal, endmills carrying CNHT…and ENHT…inserts (TORMILL).
- Used for undercutting, for the finish cut of sculptured surfaces, for steep or vertical walls, thin walls, long and unsupported workpieces and parts with non-rigid clamping.
- The specified diameter is for inserts with a 1.0 mm radius. For other radii options, see diameter change in the table below.
- Number of inserts.
- Maximum ramping angle.
- C-Cylindrical.
- Master insert identification.
SKU: E93CN Toroidal Bull Nose Endmills with CNHT...and ENHT... Inserts -
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling tools
E93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
Indexable Tools, Milling Tools, Copy milling, contouring, Shoulder milling toolsE93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
- Endmills with FLEXFIT threaded adaptation carrying toroidal inserts (TORMILL).
- Used for undercutting, for the finish cut of steep or vertical walls, thin walls, long and unsupported workpieces and parts with non-rigid clamping.
- When mounting items with FLEXFIT threaded adaptation to their holders, the mating surfaces and threaded areas must be thoroughly cleaned.
- Apply appropriate tightening torque to eliminate a gap between the mating faces.
- Estimated torque values are specified in the TQ_3 parameter .
SKU: E93CN-M Bull Nose Endmills with FLEXFIT Threaded Adaptation Carrying Toroidal Inserts
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-L Boring Tool For Pin Turning （Large Diameter)
Indexable Tools, Boring and Reaming Tools, Fine boring toolsCBH-L Boring Tool For Pin Turning （Large Diameter)
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-L Boring Tool For Pin Turning （Large Diameter) -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH32P Micro-finishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-finishing Boring Kit -
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI
There are no reviews yet.