• CAOD – Rough boring cartridge (for large D.O.C.), supplied with the cartridge, unless ordered differently • CAORC – Precision boring cartridge
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Tube designation
BTA deep hole drill, Drilling Tools, Indexable Tools
DSC-EC Deep Single Tube Counterborer with Through Hole, External 4 Start Thread and a Cartridge (40-100 dia.)
Availability:
200 in stock
- Deep Single Tube Counterbore with Through Hole, External 4 Start Thread and a Cartridge (40-100 dia.).
- Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
Based on 0 reviews
Be the first to review “DSC-EC Deep Single Tube Counterborer with Through Hole, External 4 Start Thread and a Cartridge (40-100 dia.)”
You may also like…
-
Indexable Tools, Drilling Tools, BTA deep hole drill
TS-I** Drill Tubes – STS System – Inner 4 Start Thread Connection
Indexable Tools, Drilling Tools, BTA deep hole drillTS-I** Drill Tubes – STS System – Inner 4 Start Thread Connection
- Drill Tubes – STS System – Inner 4 Start Thread Connection.
- Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube.
- Requires the usage of dedicated machines.
SKU: TS-I** Drill Tubes - STS System - Inner 4 Start Thread Connection
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
CBH-L Boring Tool For Pin Turning （Large Diameter)
Indexable Tools, Boring and Reaming Tools, Fine boring toolsCBH-L Boring Tool For Pin Turning （Large Diameter)
- Each boring head with three different sizes insert holders for different boring ranges.
- Standard insert holder for inserts with lead angle 3°，for a better working performance during bling blind hole boring.
- Insert holder can be mounted in opposite direction to back boring.
- Better connection between insert holder and tool body provides higher tool prigidty and working performance.
- AII DCK-CBH fine boring tools are with internal cooling design,which increases the surface finish and inserts tool life.
SKU: CBH-L Boring Tool For Pin Turning （Large Diameter) -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
DBJ12 Micro-boring Bar
- Adjustment Precision 0.002 mm on Diameter.
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring.
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
SKU: DBJ12 Micro-boring Bar
There are no reviews yet.