• Use of DCONXWS diameter tools provides the best performance as collets reduce gripping force by 25%. • B is the designation for coolant through flange.
(1) With coolant through the flange
(2) Min. diameter by using a reduction collet
(3) Max. diameter without a collet 
* Optional, should be ordered separately* Optional, should be ordered separately
DIN 69871 SK30/SK40/SK50, High-Performance Chucks, Tool Holders
DIN69871-MAXIN Power Chucks with DIN 69871 Form AD/B Taper Shanks
Availability:
200 in stock
- Power chucks with DIN 69871 form AD/B taper shanks.
Based on 0 reviews
Be the first to review “DIN69871-MAXIN Power Chucks with DIN 69871 Form AD/B Taper Shanks”
Related products
-
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK100A Shrink Fit Toolholders
- Tool holding device: HSK 63A.
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK100A Shrink Fit Toolholders -
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders -
Clamping Technology, Tool Holders, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A ER Collet Chucks
- Tool holding device: HSK 63A-ER.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: HSK100A ER Collet Chucks
There are no reviews yet.