• Inserts and guide pads should be ordered separately
• Ordering example: DDD-EF 043.00-FB
(1) Cutting diameter minimum
(2) Cutting diameter maximum
(3) Key flat size
(4) Outer tube designation
(5) Inner tube designation
BTA deep hole drill, Drilling Tools, Indexable Tools
DDD-EF-FB Deep Double Tube Drills with External 4 Start Thread for High Feed (25-65 dia.)
Availability:
200 in stock
- Deep Double Tube Drills with External 4 Start Thread for High Feed (25-65 dia.).
Based on 0 reviews
Be the first to review “DDD-EF-FB Deep Double Tube Drills with External 4 Start Thread for High Feed (25-65 dia.)”
You may also like…
-
Indexable Tools, Drilling Tools, BTA deep hole drill
TDO-I (D18.41-65.00) Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
Indexable Tools, Drilling Tools, BTA deep hole drillTDO-I (D18.41-65.00) Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
- Double-Tube Drill System with 4 Start Thread Connection Outer Tubes.
- Cooling fluid is induced between the coaxial tubes, conveying the chips through the inner tube and can be applied for standard machines.
SKU: TDO-I (D18.41-65.00) Double-Tube Drill System with 4 Start Thread Connection Outer Tubes
Related products
-
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH Micro-borng TooI
- Adjustment precision 0.002 mm diameter.
- One boring body with insert hoder or boring bar can be for boring and back boring.
- Standard insert holder for inserts with lead 3°，for a better working performance during bling hole boring.
- The extensive area serrated with connection between insert holder and tool body provides higher tool rigidity and working performance.
- All DCK-FBH fine boring tools are with intemal cooling design,which increases the surface finish and inserts tool life.
SKU: FBH Micro-borng TooI -
Indexable Tools, Boring and Reaming Tools, Fine boring tools
FBH32P Micro-finishing Boring Kit
- Adjustment Precision 0.002 mm on Diameter
- One Boring Body With Ineert Holder or Boring Bar Can Be For Boing And Back Boring
- Standaed insert HoIder For Inserts With lead Angle 3°，For a Better Working Performance During Blind Hole Boring.
- The extensive Area Serrated With connection Between insert Holder And Tool Body Provides Higer Tool Rigity And Working Performance.
- All DCK-FBH Fine Boring Tools Are With internal Cooling Design,Which increases The Surface Finish And inserts Tool Life
SKU: Micro-finishing Boring Kit
There are no reviews yet.