SKU: Collet Holder for high-speed (CTH)
Categories: Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Chucks, DIN 69893 HSK-A, HSK-E, HSK-F, JIS (MAS 403) BT30/BT40/BT50, Tool Holders
Collet Holder for high-speed (CTH)
Availability:
200 in stock
- The CTA/CTH, though compact, has a thick body design.
- It absorbs cutting vibration perfectly and makes stable machining possible.
- Steel ball bearings are built into the nut, so the collet does not get twisted when tightened.
- The nut is finished using the same process after heat treatment, thus providing high-accuracy clamping.
Based on 0 reviews
Be the first to review “Collet Holder for high-speed (CTH)”
Related products
-
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders -
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50
BT 2° Side Lock Holders
Clamping Technology, Tool Holders, Slotting Cutter Adapters, JIS (MAS 403) BT30/BT40/BT50BT 2° Side Lock Holders
- Tool holding device: BT30-50.
- Bore holes for data carriers according to JIS B6339.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1. - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm.
SKU: BT 2° Side Lock Holders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
2°Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F2°Side Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: 2°Side Lock Holders
There are no reviews yet.