• Use only inductive heating device for SRKIN holders • Preset screw CX allows supply of coolant via JET channels – do not remove
(1) Hex key size for the rear stopper screw
* Optional, should be ordered separately
CAMFIX ISO 26623-1, Shrink Fit Chuck, Tool Holders
C#-SRKIN-CX Thermal Shrink Chucks with CAMFIX (ISO 26623-1) Tapered Shank and Coolant Jet Channels along the Shank Bore
Availability:
200 in stock
- Thermal Shrink Chucks with CAMFIX (ISO 26623-1) Tapered Shank and Coolant Jet Channels along the Shank Bore.
Based on 0 reviews
Be the first to review “C#-SRKIN-CX Thermal Shrink Chucks with CAMFIX (ISO 26623-1) Tapered Shank and Coolant Jet Channels along the Shank Bore”
Related products
-
Clamping Technology, Tool Holders, Face Mill Arbor, DIN 69893 HSK-A, HSK-E, HSK-F
Shell Mill Hoiders
- Tool holding device: HSK 63A-100A.
- Bore holes for data carriers according to DIN 69893.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: Shell Mill Hoiders -
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK-A Shrink Fit Toolhoders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK-A Shrink Fit Toolhoders
- Tool holding device: HSK 63A.
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK-A Shrink Fit Toolhoders -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-FSide Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: Side Lock Holders
There are no reviews yet.