SKU: 6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B
Categories: Solid Milling, Solid round tools, Square
Solid Milling, Solid round tools, Square
6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B-6
Availability:
200 in stock
- 6 flute, 45° helix, medium length, solid carbide endmills.
- Used for finishing of hard materials up to 65 HRC.
- Use IC903 for hard steel and high temperature alloys and IC900 for all other applications.
- Use IC903 for machining hardened steel up to 65 HRc.
- Number of flutes.
- C-Cylindrical, W-Weldon.
| Brands | |
|---|---|
| Units of length | |
| Workpiece Material | Cast Iron (K), Hardened Steel (H), Heat-resistant Alloy and Titanium Alloy (S), Stainless Steel (M), Steel (P) |
Based on 0 reviews
Be the first to review “6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B-6”
Related products
-
Solid round tools, Solid Milling, Square
SOLID CARBIDE ENDMILLS US200-SN4 4 Flute, With Reduced Neck Diameter
Solid round tools, Solid Milling, SquareSOLID CARBIDE ENDMILLS US200-SN4 4 Flute, With Reduced Neck Diameter
● Suitable for general machining of stainless steel
(<280HB).
● Special edge design effectively solves the crumbs.
● Water，oil cooling are the best cooling methods.SKU: US200-SN4 4 Flute, with Reduced Neck Diameter -
Solid round tools, Solid Milling, Ball Nose
SOLID CARBIDE ENDMILLS UP210-B2 2 Flute, Ballnose
● Suitable for steels﹠cast iron(≤48HRC).
● High performance AlCr series coating with high temperature resistance
and high wear resistance.
● Adapt to oil mist, water, oil, air cooling and other cooling conditions.SKU: UP210-B2 2 Flute, Ballnose -
-
Solid round tools, Solid Milling, Roughing
SOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
Solid round tools, Solid Milling, RoughingSOLID CARBIDE ENDMILLS UPN210-S4 4 Flute Square End, With Roughing Geometry
● Suitable for roughing machining of steels﹠cast iron(≤48HRC).
● Cutting edge with Special chip-breaking design, suitable for groove
and side wall roughing.SKU: UPN210-S4 4 Flute Square End, with Roughing Geometry
There are no reviews yet.