SKU: α WIPER CLEANER
Categories: Accessories for Toolholder, Tool Holders
Accessories for Toolholder, Tool Holders
α WIPER CLEANER
Availability:
200 in stock
- Developed for cleaning the clamping bores such as hydraulic chucks and shrink fit holders.
-
Use a cleaner matching the chuck bore size.
| Brands | |
|---|---|
| Units of length |
Based on 0 reviews
Be the first to review “α WIPER CLEANER”
Related products
-
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-F
HSK100A Shrink Fit Toolholders
Clamping Technology, Tool Holders, Shrink Fit Chuck, DIN 69893 HSK-A, HSK-E, HSK-FHSK100A Shrink Fit Toolholders
- Tool holding device: HSK 63A.
- Bore holes for data carriers according to DIN 69893.
- High runout accuracy.
- Extreme clamping torque.
- Short chamfer.
- Cool Jet on request.
- Low tendency towards vibrations.
- Slim design at the top.
- Very rigid shank.
SKU: HSK100A Shrink Fit Toolholders -
Clamping Technology, Tool Holders, Collet Chucks, JIS (MAS 403) BT30/BT40/BT50
BT30 ER Collet Chucks
- Tool holding device: BT30.
- Bore holes for data carriers according to JIS B6339.
- Fine balanced at G 2.5 at 25,000 rpm.
- High runout accuracy (< 0.003 mm).
- Highest rigidity.
- Highest clamping forces.
SKU: BT30 ER Collet Chucks -
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F
2°Side Lock Holders
Clamping Technology, Tool Holders, Weldon Tool Holder, DIN 69893 HSK-A, HSK-E, HSK-F2°Side Lock Holders
- Tool holding device: HSK 63-100.
- Bore holes for data carriers according to DIN 69893.
- Run-out accuracy ≤ 0.003 mm measured from taper
to D1 - Balancing grade G2.5 at 25,000 RPM or Umax < 1 gmm
SKU: 2°Side Lock Holders -
Clamping Technology, Tool Holders, Morse Taper Adapters, JIS (MAS 403) BT30/BT40/BT50
BT Morse Taper Holders without Tang
Clamping Technology, Tool Holders, Morse Taper Adapters, JIS (MAS 403) BT30/BT40/BT50BT Morse Taper Holders without Tang
- Morse Taper Holders without Tang.
- Bore holes for data carriers according to JIS B6339.
- Chuck body balanced G6.3 8000 1/min.
- All functional surfaces fine machined.
- Taper tolerance AT3.
SKU: BT Morse Taper Holders without Tang
There are no reviews yet.