square end mill
Square
Showing 1–30 of 70 results
-
Solid Milling, Solid round tools, Square
2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2
- 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30 and 45° Helix Medium Length Solid Carbide Slot / Drill Endmills EC-A-2 -
Solid Milling, Solid round tools, Square
2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
Solid Milling, Solid round tools, Square2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2
- 2 flute, 30° helix medium length solid carbide slot / drill endmills with chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 2 Flute, 30° Helix Medium Length Solid Carbide Slot / Drill Endmills with Chamfered Corners ECC-A-2 -
Solid Milling, Solid round tools, Square
2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
Solid Milling, Solid round tools, Square2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2
- 2 flute, 45° helix medium length solid carbide endmills for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 45° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-B-2 -
Solid Milling, Solid round tools, Square
2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
Solid Milling, Solid round tools, Square2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2
-
2 flute, 55° helix medium length solid carbide endmills.
-
Used for machining aluminum.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: 2 Flute, 55° Helix Medium Length Solid Carbide Endmills for Machining Aluminum ECA-F-2 -
-
Solid Milling, Solid round tools, Square
3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
Solid Milling, Solid round tools, Square3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3
- 3 flute, 38 and 45° helix medium length slot / drill solid carbide endmills with chamfered corners.
- Multi-purpose endmill.
- Suitable for deep slotting.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38 and 45° Helix Medium Length Slot / Drill Solid Carbide Endmills with Chamfered Corners ECC-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3
- 3 flute, 38° helix medium length solid carbide endmills.
- Multi-purpose endmill.
- Suitable for deep slotting.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 38° Helix Medium Length Solid Carbide Endmills EC-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3
- 3 flute, 38° helix short solid carbide slot / drill endmills with 3xd relieved necks and chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: 3 Flute, 38° Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners ECS/ECCS-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3
Solid Milling, Solid round tools, Square3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3
- 3 flute, 38° helix short undersized slot / drill solid carbide endmills.
- Undersized short design for keyholes.
- Number of flutes.
- Maximum ramping angle.
- W-Weldon.
SKU: 3 Flute, 38° Helix Short Undersized Slot / Drill Solid Carbide Endmills ECU-E-3 -
Solid Milling, Solid round tools, Square
3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
Solid Milling, Solid round tools, Square3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3
- 3 flute, 45° helix medium length slot / drill solid carbide endmills.
- Excellent for deep slotting and shouldering.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 3 Flute, 45° Helix Medium Length Slot / Drill Solid Carbide Endmills EC-B-3 -
Solid Milling, Solid round tools, Square
4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6
Solid Milling, Solid round tools, Square4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6
- 4 & 6 flute, 45° helix extra long solid carbide endmills.
- Smooth cutting in extra long depth.
- Cannot be used for plunging application.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: 4 & 6 Flute, 45° Helix Extra Long Solid Carbide Endmills ECXL-B-4/6 -
Solid Milling, Solid round tools, Square
4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
Solid Milling, Solid round tools, Square4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6
- 4 & 6 flute, 45° helix long solid carbide endmills.
- Smooth cutting in extra long depth.
- Cannot be used for plunging application.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: 4 & 6 Flute, 45° Helix Long Solid Carbide Endmills ECL-B-4/6 -
Solid Milling, Solid round tools, Square
4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
Solid Milling, Solid round tools, Square4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4
- 4 flute, 30° helix medium length solid carbide endmills with chamfered corners.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: 4 Flute, 30° Helix Medium Length Solid Carbide Endmills with Chamfered Corners ECC-A-4 -
Solid Milling, Solid round tools, Square
6 Flute, 45° Helix Extra Long Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC EC-B6
Solid Milling, Solid round tools, Square6 Flute, 45° Helix Extra Long Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC EC-B6
- 6 flute, 45° helix extra long solid carbide endmills.
- Used for finishing on hard materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: 6 Flute, 45° Helix Extra Long Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC EC-B6 -
Solid Milling, Solid round tools, Square
6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B-6
Solid Milling, Solid round tools, Square6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B-6
- 6 flute, 45° helix, medium length, solid carbide endmills.
- Used for finishing of hard materials up to 65 HRC.
- Use IC903 for hard steel and high temperature alloys and IC900 for all other applications.
- Use IC903 for machining hardened steel up to 65 HRc.
- Number of flutes.
- C-Cylindrical, W-Weldon.
SKU: 6 Flute, 45° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRC ECH-B -
Solid Milling, Solid round tools, Square
6 Flute, 50° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRc EC-D6
Solid Milling, Solid round tools, Square6 Flute, 50° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRc EC-D6
- 6 flute, 50° helix medium length solid carbide endmills.
- Used for finishing on hard materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical, W-Weldon.
- Maximum ramping angle.
SKU: 6 Flute, 50° Helix Medium Length Solid Carbide Endmills for Finishing of Hard Materials up to 65 HRc EC-D6 -
Solid Milling, Solid round tools, Square
EC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills
- 2 flute, 30 and 45° helix medium length solid carbide slot / drill endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-A2 (economical- medium) Economical Type 2 Flute, 30° Helix Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A2 (medium length) 2 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC
Solid Milling, Solid round tools, SquareEC-A2 (medium length) 2 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC
- 2 flute, 30° helix medium length solid carbide endmills for hard materials up to 65 HRC.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2 (medium length) 2 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC -
Solid Milling, Solid round tools, Square
EC-A2-H (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
Solid Milling, Solid round tools, SquareEC-A2-H (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
- 2 flute, 30° helix solid carbide endmills for rib processing on hard materials up to 65 HRC.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2-H (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC -
Solid Milling, Solid round tools, Square
EC-A2-M (rib processing) (continued) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
Solid Milling, Solid round tools, SquareEC-A2-M (rib processing) (continued) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
- 2 flute, 30° helix solid carbide endmills for rib processing on hard materials up to 55 HRC.
- The DC tolerance is: 0 – -0.015 mm.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2-M (rib processing) (continued) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 55 HRC -
Solid Milling, Solid round tools, Square
EC-A2-M (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
Solid Milling, Solid round tools, SquareEC-A2-M (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing
- 2 flute, 30° helix solid carbide endmills for rib processing on hard materials up to 55 HRC.
- The DC tolerance is: 0 – -0.015 mm.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2-M (rib processing) 2 Flute, 30° Helix Solid Carbide Endmills for Rib Processing on Hard Materials up to 55 HRC -
Solid Milling, Solid round tools, Square
EC-A2-R (rib processing) (continued) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A2-R (rib processing) (continued) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills
- 2 flute, 30° helix and corner radii solid carbide endmills for rib processing on hard materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EC-A2-R (rib processing) (continued) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC -
Solid Milling, Solid round tools, Square
EC-A2-R (rib processing) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing
Solid Milling, Solid round tools, SquareEC-A2-R (rib processing) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing
- 2 flute, 30° helix and corner radii solid carbide endmills for rib processing on hard materials up to 65 HRC.
- Number of flutes.
- C-Cylindrical.
SKU: EC-A2-R (rib processing) 2 Flute, 30° Helix and Corner Radii Solid Carbide Endmills for Rib Processing on Hard Materials up to 65 HRC -
Solid Milling, Solid round tools, Square
EC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills
- Economical type 2 flute, 30° helix, center cutting, extra-long solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A2(economical-extra long) Economical Type 2 Flute, 30° Helix, Center Cutting, Extra Long Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills
- SOLIDECO – economical type 3 flute, 30° and 38° helix, center cutting, medium length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A3/E3 (economical-medium) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills
- Economical type 3 flute, 30° and 38° helix, center cutting, short length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical, W-Weldon.
SKU: EC-A3/E3 (economical-short) Economical Type 3 Flute, 30° and 38° Helix, Center Cutting, Short Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills
Solid Milling, Solid round tools, SquareEC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills
- Economical type 4 flute, 30° helix, center cutting, medium length solid carbide endmills.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A4 (economical- medium) Economical Type 4 Flute, 30° Helix, Center Cutting, Medium Length Solid Carbide Endmills -
Solid Milling, Solid round tools, Square
EC-A4 4 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC
Solid Milling, Solid round tools, SquareEC-A4 4 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC
-
4 flute, 30° helix medium length solid carbide endmills for hard materials up to 65 HRC.
- Number of flutes.
- Maximum ramping angle.
- C-Cylindrical.
SKU: EC-A4 4 Flute, 30° Helix Medium Length Solid Carbide Endmills for Hard Materials up to 65 HRC -