Online shopping for Turning Inserts .
Indexable Inserts from a great selection at Industrial Store.
Turning Inserts
Showing 1–30 of 303 results
-
Indexable Tools, Turning Inserts, TURNING TOOLS
CC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System
Indexable Tools, Turning Inserts, TURNING TOOLSCC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System
- Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System).
SKU: CC95MT-SM Single-Sided 80° Rhombic Inserts for Finishing (CHAMELEON Multifunction Pocket System -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, Turning Inserts, TURNING TOOLSCCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCET-WF 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AF 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum
- 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum.
SKU: CCGT-AS 80° Rhombic Inserts with a 7° Positive Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel
- 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel.
SKU: CCGT-F1P 80° Rhombic Inserts with a Positive Flank for Very Low Finish Turning Conditions on Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel
- 80° rhombic inserts with CBN single top corner brazed tip, used for finishing forged steel.
SKU: CCGW/CCMT (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip and 7° Clearance for Machining Hardened Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCGW/CCMW-2 (CBN) 80° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCGW/CCMW-2 (CBN) 80° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
- 80° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys.
SKU: CCGW/CCMW-2 (CBN) 80° Positive Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum
- Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum.
SKU: CCMT (PCD) Inserts with a Single PCD Top Corner Tip, 7° Clearance and Positive Rake Angle for Finishing Aluminum -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT-14 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications
- Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications.
SKU: CCMT-CERMET Single-Sided 80° Rhombic Cermet Grade Inserts for Semi-Finishing and Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel
- 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel.
SKU: CCMT-F3P 80° Rhombic Positive Flank Inserts, for Semi-Finishing and Finishing Turning of Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel
- 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel.
SKU: CCMT-M3M 80° Rhombic Positive Flank Inserts, for Machining Stainless and Low Carbon Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys
- 80° Rhombic Inserts with a Positive Flank for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT-PF 80° Rhombic Inserts with a Positive Flank for Semi- Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing
- 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing.
SKU: CCMT-WG 80° Rhombic Inserts with a 7° Positive Flank and a Wiper Near the Corner for High Feed Finishing -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning
- 80° Rhombic Inserts with a 7° Positive Flank for Semi-Finishing and Finish Turning.
SKU: CCMT/CCGT 80° Rhombic Inserts with a 7° Positive Flank for Semi- Finishing and Finish Turning -
Indexable Tools, Turning Inserts, TURNING TOOLS
CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys
- Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys.
SKU: CCMT/CCGT-SM Single-Sided Turning Inserts for Semi-Finishing and Finishing on Soft Materials and Exotic Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGA-2 (CBN) 80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCNGA-2 (CBN) 80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys
- 80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys.
SKU: CNGA-2 (CBN) 80° Rhombic Inserts with 2 CBN Tips for Machining Hardened Steel, Sintered Metals and High Temperature Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGA-Ceramic 80° Rhombic Double- Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCNGA-Ceramic 80° Rhombic Double- Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel
- 80° Rhombic Double-Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel.
SKU: CNGA-Ceramic 80° Rhombic Double- Sided Inserts with a T-Land for Machining Cast Iron and Hardened Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials
Indexable Tools, Turning Inserts, TURNING TOOLSCNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials
- Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials.
SKU: CNGG-F3N Double-Sided Sharp-Edged Positive and Polished Rake Inserts for Finishing on Aluminum and Other Non-Ferrous Materials -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGG-M4HF/M4HM (CBN) 80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCNGG-M4HF/M4HM (CBN) 80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel
- 80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel.
SKU: CNGG-M4HF/M4HM (CBN) 80° Rhombic Inserts with 4 Chipbreaking CBN Tips for Machining Hardened Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGN-Ceramic 80° Rhombic Double-Sided Ceramic Inserts with a T-Land for Machining Cast Iron, Hardened Steel and Nickel Based Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCNGN-Ceramic 80° Rhombic Double-Sided Ceramic Inserts with a T-Land for Machining Cast Iron, Hardened Steel and Nickel Based Alloys
- 80° Rhombic Double-Sided Ceramic Inserts with a T-Land for Machining Cast Iron, Hardened Steel and Nickel Based Alloys.
SKU: CNGN-Ceramic 80° Rhombic Double-Sided Ceramic Inserts with a T-Land for Machining Cast Iron, Hardened Steel and Nickel Based Alloys -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGX-Ceramic 80° Rhombic Double-Sided Dimpled Ceramic Inserts with a T-Land for Machining Cast Iron
Indexable Tools, Turning Inserts, TURNING TOOLSCNGX-Ceramic 80° Rhombic Double-Sided Dimpled Ceramic Inserts with a T-Land for Machining Cast Iron
- 80° Rhombic Double-Sided Dimpled Ceramic Inserts with a T-Land for Machining Cast Iron.
SKU: CNGX-Ceramic 80° Rhombic Double-Sided Dimpled Ceramic Inserts with a T-Land for Machining Cast Iron -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials
Indexable Tools, Turning Inserts, TURNING TOOLSCNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials
- Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials.
SKU: CNGX-M3N Double-Sided Positive Rake Inserts with High Helical and Sharp Edge for Medium Machining on Non-Ferrous Materials -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications
- 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications.
SKU: CNMA (PCD) 80° Rhombic Inserts with a Single PCD Top Corner Tip and Positive Rake for Finishing Applications -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron
- Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron.
SKU: CNMA Double-Sided 80° Rhombic Inserts for Short Chipping Materials such as Cast Iron -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA-MW4 (CBN) 80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA-MW4 (CBN) 80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel
- 80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel.
SKU: CNMA-MW4 (CBN) 80° Rhombic Inserts with 4 CBN Wiper Edge Tips for Machining Hardened Steel -
Indexable Tools, Turning Inserts, TURNING TOOLS
CNMA-T/M1/WG (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys
Indexable Tools, Turning Inserts, TURNING TOOLSCNMA-T/M1/WG (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys
- 80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys.
SKU: CNMA-T/M1/WG (CBN) 80° Rhombic Inserts with a Single CBN Top Corner Tip for Machining Cast Iron, Hardened Steel and Super Alloys