Indexable Tools
Showing 1–30 of 1827 results
-
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools
2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
Copy milling, contouring, Cut off, slot and groove milling, Indexable Tools, Milling Tools2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR
- 2 flute chip splitting toroidal solid carbide milling heads.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Chip Splitting Toroidal Solid Carbide Milling Heads MM HT-NCSR -
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools
2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
Copy milling, contouring, Indexable Tools, Milling Tools, Shoulder milling tools2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR
- MULTI-MASTER, 2 flute, toroidal, solid carbide milling heads with a side tangential wiper.
- Used for tall shoulders or deep cavities, producing high surface finish.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
- Specially tailored radius range, available upon request.
SKU: 2 Flute Toroidal Solid Carbide Milling Heads MM HT-NWFR -
-
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 1304..R-PDRMM Milling Inserts
- MILL2000 Inserts with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enables secure clamping and high durability in rough applications.
SKU: 3M AXKT 1304..R-PDRMM Milling Inserts -
Indexable Tools, Milling Inserts, Milling Tools
3M AXKT 2006..R-PDR Milling Inserts
- MILL2000 Inserts for heavy milling applications with a variety of corner radii.
- Heavy duty design: dovetail section shape, helical cutting edge and positive rake angle.
- Enable a secure clamping and high durability in rough applications.
SKU: 3M AXKT 2006..R-PDR Milling Inserts -
-
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools
4 Flute Solid Carbide Heads MM EFS-CF
Cut off, slot and groove milling, Indexable Tools, Milling Tools, Shoulder milling tools4 Flute Solid Carbide Heads MM EFS-CF
- 4 flute solid carbide heads with 38° helix and variable pitch for chatter free roughing and finishing applications.
- Do not apply lubricant to the threaded connection.
- Number of flutes.
SKU: 4 Flute Solid Carbide Heads MM EFS-CF -
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools
4, 6 Flute Solid Carbide Heads MM EFF
Copy milling, contouring, Cut off, slot and groove milling, High-feed milling, Indexable Tools, Milling Tools4, 6 Flute Solid Carbide Heads MM EFF
- Interchangeable solid carbide FEEDMILL heads with 4 or 6 flute, for milling at very high feed and small D.O.C.
- Do not apply lubricant to the threaded connection.
SKU: 4, 6 Flute Solid Carbide Heads MM EFF -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
Chamfer milling, Face milling, Indexable Tools, Milling Tools45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16
- 45° face mills, featuring very rigid clamping, carrying inserts with 8 helical, right-hand cutting edges, providing a very economical solution (HELIDO845).
- Wiper inserts are used on face mill cutters, providing improved surface finish, thus eliminating the use of other finishing cutters.
- Fine pitch cutters, recommended for machining cast iron and for machining steel – up to 4 mm D.O.C.
- Cutting diameter maximum.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 45° Face Mills Carrying Economical Inserts with 8 Helical Right-Hand Cutting Edges S845 F45SX-16 -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
45° Face Mills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45-R18
Chamfer milling, Face milling, Indexable Tools, Milling Tools45° Face Mills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45-R18
- 45° face mills carrying square or octagonal double-sided inserts with 8/16 cutting edges.
- Cutting diameter maximum.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 45° Face Mills Carrying Square or Octagonal Double-Sided Inserts with 8/16 Cutting Edges SOF45-R18 -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
50° Endmills Carrying Square Inserts with 8 Cutting Edges IQ845 ESY-R05
Chamfer milling, Face milling, Indexable Tools, Milling Tools50° Endmills Carrying Square Inserts with 8 Cutting Edges IQ845 ESY-R05
- 50° endmills carrying screw clamped square Inserts with 8 cutting edges.
- Feature very rigid dove tail clamping and positive pocket orientation.
- Cutting diameter maximum.
- Number of inserts.
- W-Weldon.
SKU: 50° Endmills Carrying Square Inserts with 8 Cutting Edges IQ845 ESY-R05 -
Face milling, Indexable Tools, Milling Tools
50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-C#-R07
Face milling, Indexable Tools, Milling Tools50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-C#-R07
- 50° face mills with CAMFIX (ISO 26623-1 standard) tapered shanks, carrying screw clamped square Inserts with 8 cutting edges.
- Feature very rigid dove tail clamping and positive pocket orientation.
- Cutting diameter maximum.
SKU: 50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-C#-R07 -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R05
Chamfer milling, Face milling, Indexable Tools, Milling Tools50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R05
- 50° face mills carrying screw clamped square Inserts with 8 cutting edges.
- Feature very rigid dove tail clamping and positive pocket orientation.
- Cutting diameter maximum.
- Number of inserts.
SKU: 50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R05 -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R07
Chamfer milling, Face milling, Indexable Tools, Milling Tools50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R07
- 50° face mills carrying screw clamped square Inserts with 8 cutting edges.
- Feature very rigid dove tail clamping and positive pocket orientation.
- Cutting diameter maximum.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 50° Face Mills Carrying Square Inserts with 8 Cutting Edges IQ845 FSY-R07 -
Chamfer milling, Face milling, Indexable Tools, Milling Tools
65° Face Mills Carrying Inserts with 8 Cutting Edges S865 FSN-13
Chamfer milling, Face milling, Indexable Tools, Milling Tools65° Face Mills Carrying Inserts with 8 Cutting Edges S865 FSN-13
- HELIDO, Face mills carrying inserts with 8 cutting edges.
- A very efficient solution for high metal removal of cast iron and steel components.
- The 65° lead angle minimizes burrs and edge chipping for cast iron applications.
- Fine pitch.
- Cutting diameter maximum.
- Number of inserts.
- Depth of cut on steel with coarse pitch cutters and on cast iron with fine pitch cutters may be increased to 8 mm.
SKU: 65° Face Mills Carrying Inserts with 8 Cutting Edges S865 FSN-13 -
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11
Face milling, Indexable Tools, Milling Tools, Shoulder milling tools86° Face Mills Carrying all 8 Cutting Edges of LN..1106… Tangentially Clamped Inserts F86LNX-11
- 86° face mills carrying all 8 cutting edges of LN..1106… tangentially clamped inserts.
- For APMX>3 mm, Zeff is half the number indicated in the table.
- LNAR 1106 inserts should not be used on these cutters .
- F86LNX cutters enable using all 8 cutting edges of the LNKX/LNMT 1106.. inserts- 4 R.H. in the peripheral position and 4 L.H. in the frontal position .
- Feed should be limited to 0.25 mm/tooth.
- Fine pitch.
- Cutting diameter maximum.
- Number of inserts.
SKU: 86° Face Mills Carrying all 8 Cutting Edges of LN..1106... Tangentially Clamped Inserts F86LNX-11 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09
- 90° face mills carrying H490 ANKX 09.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
SKU: 90° Face Mills Carrying H490 ANKX 09.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-09 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12
- 90° face mills carrying H490 ANKX 12.. double-sided rectangular inserts with 4 helical cutting edges.
- Number of inserts.
- Maximum ramping angle – valid only when the H490 ANKX1205R 15T-FF insert is used.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 12.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-12 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17
- 90° face mills carrying H490 ANKX 17.. double-sided rectangular inserts with 4 helical cutting edges (HELIDO 490 LINE).
- Rampdown angle is valid only when H490 ANKX 1706R15T-FF insert is used (tool diameter is then 1.5 mm larger).
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H490 ANKX 17.. Double-Sided Rectangular Inserts with 4 Helical Cutting Edges H490 F90AX-17 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10
- 90° face mills carrying H690 TNKX 1005.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying H690 TNKX 1005.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16
- 90° face mills carrying H690 TNKX 1606.. triangular inserts with 6 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying H690 TNKX 1606.. Triangular Inserts with 6 Helical Cutting Edges H690 F90AX-16 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07
- 90° face mills carrying HM390 TCKT 0703 triangular inserts with 3 helical cutting edges.
- Insert clamping screw must be lubricated every indexing.
- Tightening torque 0.9 Nxm.
SKU: 90° Face Mills Carrying HM390 TCKT 0703 Triangular Inserts with 3 Helical Cutting Edges HM390 FTC-07 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15
- 90° face mills carrying HM390 TDKT 1505 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HM390 TDKT 1505 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19
- 90° face mills carrying HM390 TDKT 1907 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- 0 – Without coolant supply, 1 – With coolant supply.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TDKT 1907 Triangular Inserts with 3 Helical Cutting Edges HM390 FTD-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10
- 90° face mills carrying HM390 TPKT 1003 triangular inserts with 3 helical cutting edges.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM390 TPKT 1003 Triangular Inserts with 3 Helical Cutting Edges HM390 FTP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 ADKT 1505… Inserts HM90 F90A-15
- HELI2000, 90° face mills carrying HM90 ADKT 1505… inserts.
-
Thinner insert ADM. 1503.. mounted on TSP-15R seat.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HM90 ADKT 1505... Inserts HM90 F90A-15 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HM90 APKT 1003… Inserts HM90 F90AP-10
- HELI2000, 90° face mills carrying HM90 APKT 1003… inserts.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HM90 APKT 1003... Inserts HM90 F90AP-10 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 1906… Long Edged Inserts HP F90AT-19
- 90° face mills carrying HP AD.. 1906… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw. In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
SKU: 90° Face Mills Carrying HP AD.. 1906... Long Edged Inserts HP F90AT-19 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP AD.. 2207… Long Edged Inserts HP F90AT-22
- 90° face mills carrying HP AD.. 2207… long edged inserts.
- Insert clamping/unclamping procedure: First loosely attach the rear clamping screw, then the face screw.
- In the same order, tighten them both.
- Number of inserts.
- Maximum ramping angle.
- 0 – Without coolant supply, 1 – With coolant supply.
SKU: 90° Face Mills Carrying HP AD.. 2207... Long Edged Inserts HP F90AT-22 -
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools
90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
Cut off, slot and groove milling, Face milling, Indexable Tools, Milling Tools, Shoulder milling tools90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
- HELIPLUS, 90° fine pitch face mills carrying HP ANKT 0702.. inserts.
- Insert tightening torque: 0.62 Nxm.
- Number of inserts.
- Maximum ramping angle.
- Maximum RPM.
SKU: 90° Face Mills Carrying HP ANKT 0702.. Inserts HP F90AN-07
