show blocks helper
Indexable Tools, Boring and Reaming Tools, Rough boring tools
FM-DBH Long Warp Bouble-edged Rough Boring Tool
- The blade support has increased thickness and rigidity.
- Suitable for single-edge boring, high-edge boring, and high-low step boring. The boring range is φ25-φ300mm.
- The new design of the blade slide seat, the knife is supplemented, and the two forces on the slide seat cancel each other out during processing, generating large rigidity and cutting force, suitable for various forms of boring operations.
- According to different processing requirements, the boring cutter can be easily adjusted for a small variety of processing, and the processing depth can be extended to the required length with the extension rod.
- The side scale of the essence helps the user to easily adjust to the required range without having to preset on the tool setting instrument.
- It is suitable for use with various types of cutting center machines or boring machines, and can be used with designated blades of the same specifications from various brands, which not only saves the time of tool grinding and greatly increases the efficiency of boring.
- height short design, flat blade or high and low blade can be used.
- Large-hole boring cutters with a diameter of φ200 or more, using direct components, have a simple structure and strong rigidity, and the adjustment range is 50mm in diameter.
- Vacuum heat treatment HRC 52 °, which guarantees the hardness of the shank and has a certain toughness. Tool holders that are not well heat-treated will be too hard to crack and too soft to deform during processing.
- Anti-corrosion coating: not only guarantee the beautiful appearance of the handle, but also greatly extend the service life of the handle. Blackened bad handles, many large and small white spots on the handle will inevitably greatly reduce the service life of the handle.
SKU: FM-DBH Long Warp Bouble-edged Rough Boring Tool
Showing the single result