finishing
Showing all 20 results
-
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCET Rhombic80°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) CCET Rhombic80°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
SKU: Turning Inserts (Positive) CCMT/CCGT Rhombic80°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCET Rhombic55°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) DCMT/DCGT/DCGX Rhombic55°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) DCET Rhombic55°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
- AL for grooved aluminum alloy cutting.
- Large rake angle, high sharpness of blade.
SKU: Turning Inserts (Positive) SCMT/SCGX Square 90°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCET Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TCET Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) TCMT/TCGT Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) TPET/TPEH Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
SKU: Turning Inserts (Positive) TPMT/TPGT Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
- MM for ordinary steel, alloy steel, stainless steel finishing.
- Sharp cutting edge, enables high surface quality.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- TP for Light cutting for ordinary steel, alloy steel and cast iron.
- Large blade width design improves the strength of the blade tip.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chip breaker improves chip breaking performance at large cutting depth.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) VBET/VBMT Rhombic35°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
- GP for light cutting of general steel, alloy steel,stainless steel and cast iron.
- The combination of flat edges and double rake angles ensures the strength of the cutting edge and cutting sharpness.
- KM for slotted common steel, alloy steel, cast iron semi-precision-coarse Working.
- Variable blade width design, taking into account both sharpness and chipping resistance.
SKU: Turning Inserts (Positive) VCET/VCMT/VCGT Rhombic35°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts (Positive) VPET Rhombic35°,with Hole
- PS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,small cutting depth.
- GS for finishing of steels(mild steels) and stainless steel.
- Sharp edge reduces cutting force,enables high quality surface.
- Low feed,large cutting depth.
SKU: Turning Inserts (Positive) VPET Rhombic35°,with Hole -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) CNMG Rhombic 80° with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) CNMG Rhombic 80° with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG Rhombic 55° with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) DNMG Rhombic 55° with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) DNMG Rhombic 55° with Hole
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- TS for semi-finishing of general steel and alloy steel.
- Big rake,smooth chip evacuation.
- Variable groove depth design, with super chip removal.
- SV for semi-finishing of general steel and alloy steel.
- Throughout groove and wide chip groove make cutting available in unstable working conditions.
- Long chip groove allows high depth of cuts.
SKU: Turning Inserts(Negative) DNMG Rhombic 55° with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) SNMG Square 90°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
SKU: Turning Inserts(Negative) SNMG Square 90°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole
Turning Inserts, TURNING TOOLSGENERAL TURNING Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole
- PS for finishing of steel(mild steel) and stainless steel.
- Sharp edge reduces cutting force, enables high quality surface.
- Low feed,small cutting depth.
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- LF for stainless steel finishing to semi-finishing.
- Small blade width + large rake angle, increase the strength of the blade.
- Curved blade design, stable cutting flow direction control
SKU: Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) TNMG Triangle 60°,with Hole
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- TS for semi-finishing of general steel and alloy steel.
- Big rake,smooth chip evacuation.
- Variable groove depth design, with super chip removal.
SKU: Turning Inserts(Negative) TNGG/TNMG Triangle 60°,with Hole 2 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) VNMG Rhombic35°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
- TP For semi-finish machining of ordinary steel, alloy steel and cast iron.
- Double front angle, large blade width design, enhance the strength of the blade.
- Overall pattern design, stable and reliable installation.
- Arrow-shaped chipbreaker improves chipbreaking performance at large cutting depths.
- SM for medium cutting of stainless steel and mild steel.
- Sharp cutting edge.
SKU: Turning Inserts(Negative) VNMG Rhombic35°,with Hole 1 -
Turning Inserts, TURNING TOOLS
GENERAL TURNING Turning Inserts(Negative) WNMG Trigon60°,with Hole
- GF for finishing of general steel and alloy steel.
- Sharp tool nose and strong cutting edge.
- Good chip control under small cutting depth.
- QF for finishing of general steel and alloy steel.
- Curved edge,sharp cutting edge, good chip control and fine surface finish due to curved edge.
- SF for stainless steel and Heat
- Sharp edge due to results in low cutting forces particularly for thin wall structures and extended shafts.
- LF for stainless steel finishing to semi-finishing.
- Small blade width + large rake angle, increase the strength of the blade.
- Curved blade design, stable cutting flow direction control.
- GM for semi-finishing of general steel and alloy steel.
- Strong flat cutting edge.
- QM for semi-finishing of general steel and alloy steel.
- Gradient and waved hump wide applicable geometry range.
SKU: Turning Inserts(Negative) WNMG Trigon60°,with Hole 1